-
三星完成8nm射頻技術開發:面積減少35%,能效提升35%
三星宣布完成了基于 8nm生產工藝的射頻(RF) 技術的開發。這項尖端的代工技術有望提供“一個芯片解決方案”,尤其是通過支持多通道和多天線芯片設計增強 5G 網絡通信。這項 8nm射頻平臺的推出將會進一步鞏固三星在 5G 半導體市場的領導地位。
2021-06-11
三星 8nm 射頻技術
-
輕松驅動ADC輸入和基準電壓源,簡化信號鏈設計
本文重點介紹新型連續時間Sigma-Delta (CTSD)精密ADC最重要的架構特性之一:輕松驅動阻性輸入和基準電壓源。實現最佳信號鏈性能的關鍵是確保其與ADC接口時輸入源或基準電壓源本身不被破壞。使用傳統ADC時,為實現輸入和基準電壓源與ADC的無縫接口,需要復雜的信號調理電路設計——稱為前端設計。CTSD ...
2021-06-09
ADC 基準電壓源 信號鏈 設計
-
ADALM2000實驗:源極跟隨器(NMOS)
面包板連接如圖1和圖2所示。波形發生器W1的輸出連接至M1的柵極端子。示波器輸入1+(單端)也連接至W1輸出。漏極端子連接至正極(Vp)電源。源極端子連接至2.2 kΩ負載電阻和示波器輸入2+(單端)。負載電阻的另一端連接至負極(Vn)電源。要測量輸入-輸出誤差,可以將2+連接至M1的柵極,2–連接至源極,以...
2021-06-09
ADALM2000 源極跟隨器
-
淺析毫米波頻率下PCB線路板材料的玻璃纖維效應
半導體技術的進步促進了毫米波技術的發展,在經濟型的汽車上使用77 GHz雷達系統即將成為現實。未來這些雷達安全系統作為量產的商用毫米波設備和組件,不可避免地成為“自動駕駛”汽車的組成部分。當然,不可不說的是,印刷電路板的高頻線路板材料在77 GHz汽車雷達應用中的重要性。在高頻頻段,盡管許...
2021-06-04
毫米波 頻率 PCB線路板 玻璃纖維效應
-
為什么輸出端共模信號的影響大于CMRR規格值?
與差分輸入電路打交道時,共模抑制比(CMRR)是基本概念,但常常被誤解。使用儀表放大器時,關于電路中共模信號的影響,遇到不正確的期望并不罕見。
2021-06-04
輸出端 共模信號 CMRR 規格值
-
儀表放大器橋接電路誤差預算分析
在典型應用中,有必要了解儀表放大器的誤差源。下圖1所示為一個350 Ω的稱重傳感器,當用10 V源激勵時,其滿量程輸出為100 mV。用外部499 Ω增益設置電阻,將AD620的增益設為100。表中列出了每種誤差源對2145 ppm的總非調整誤差的貢獻。
2021-06-04
儀表放大器 橋接電路 誤差預算
-
經典儀表放大器的新版本提供更高的設計靈活性
與傳感器連接時,儀表放大器(IA)作用強大且功能多樣,但也存在一些限制,會阻礙可變增益IA或可編程增益儀表放大器(PGIA)的設計。在有些文獻中,后者也被稱為軟件可編程增益放大器(SPGA)。因為經常遇到要求根據各種各樣的傳感器或環境條件調節電路的情況,我們需要這類PGIA。采用固定增益時,系統設...
2021-06-04
經典儀表放大器 新版本 設計 靈活性
-
使用混合信號示波器調試嵌入式混合信號設計
目前,基于微控制器(MCU)和數字信號處理器(DSP)的嵌入式設計一般都會同時帶 有模擬信號和數字信號成分。傳統上,設計師是用示波器和邏輯分析儀進行測試和調 試;而現在,新一類測量工具——混合信號示波器(MSO)——已經能夠提供更好的 方法來調試這些 MCU 基和 DSP 基混合信號嵌入式設計。
2021-06-03
混合信號示波器 混合信號設計
-
如何使用示波器檢驗ESD仿真器?
在設計滿足全球電磁兼容能力(EMC)標準的產品時,靜電放電(ESD)抗擾度測試至關重要。大多數產品都會遵循主要國際標準,比如IEC 61000-4-2和美國ANSI C63.16,都規定了怎樣設置和執行這些ESD測試。這些測試要求ESD仿真器,來生成準確的可重復的測試脈沖。
2021-06-03
示波器 EMC ESD仿真器
- 兆易創新GD32F30x STL軟件測試庫獲得德國萊茵TüV IEC 61508功能安全認證
- 芯科科技第三代無線開發平臺引領物聯網發展
- MSO 4B 示波器為工程師帶來更多臺式功率分析工具
- 艾為電子推出新一代高線性度GNSS低噪聲放大器——AW15745DNR
- 瑞薩發布四通道主站IC和傳感器信號調節器, 以推動不斷增長的IO-Link市場
- e絡盟現貨供應 Abracon 新推出的 AOTA 系列微型鑄型電感器
- 加賀富儀艾電子推出支持Wi-Fi 6和藍牙的無線局域網/藍牙組合模塊
- 【“源”察秋毫系列】 Keithley在碳納米管森林涂層纖維復合材料的應用
- 數字驅動工業,智能賦能制造 AMTS & AHTE SOUTH CHINA 2024同期會議全公開!
- 團體觀展招募!104CEF開啟組團觀眾通道,解鎖更多禮遇
- 觸摸式OLED顯示屏有望重新定義汽車用戶界面
- 用Python自動化雙脈沖測試
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall