-
具有溫度補償?shù)母綦x式低功耗PH值測試系統
圖1所示電路是一個完全隔離式低功耗pH傳感器信號調理器和數字化儀,并且?guī)в凶詣訙囟妊a償以實現高精度。該電路可為0至14范圍內的pH值提供精度為0.5%的讀數,無噪聲代碼分辨率大于14位,適用于多種工業應用,如化工、食品加工、水處理、污水分析等。
2020-08-14
溫度補償 隔離式 PH值 測試系統
-
帶內部旁路電容的數據采集μModule器件的PSRR特性表征
在優化數據采集(DAQ)系統時,設計人員必須仔細考慮電源對高精度性能的影響。電源電路中通常都包含低壓差線性穩壓器和DC-DC開關模式轉換器的組合。開關模式轉換器的一個缺點是:它們會產生輸出紋波。雖然紋波幅度相對較低,但它們會耦合到模擬信號路徑的關鍵元件中,可能會破壞測量和降低性能。電源...
2020-08-14
旁路電容 數據采集 μModule器件 PSRR
-
寬禁帶半導體器件GaN、SiC設計優化驗證
第三代寬禁帶半導體器件GaN和SiC的出現,推動著功率電子行業發生顛覆式變革。新型開關器件既能實現低開關損耗,又能處理超高速dv/dt轉換,且支持超快速開關切換頻率,帶來的測試挑戰也成了工程師的噩夢。
2020-08-14
寬禁帶 半導體器件 GaN SiC 設計
-
Limata創新型的LUVIR技術加速PCB防焊量產制程
北京 2020年8月6日—專業LDI設備制造商Limata日前正式發布其獨有的、經過市場驗證的適用于所有X系列產品的LUVIR技術?。此獨特的LDI技術在降低設備維護成本的同時,能顯著提高防焊油墨的成像速度。
2020-08-13
Limata LUVIR技術 PCB 防焊油墨
-
貿澤電子與Molex聯手打造數字工業物聯網智庫
2020年8月13日 – 專注于引入新品推動行業創新的電子元器件分銷商貿澤電子 (Mouser Electronics) 與電子解決方案全球知名制造商Molex 合作,聯手為設計工程師打造了一個專注于工業物聯網 (IIoT) 的全新資源網站。
2020-08-13
貿澤電子 Molex 數字工業物聯網 智庫
-
改進峰值電流模式控制
最糟糕的設計方案通常會在最低輸入電壓下產生最大輸出功率。而在現實情況中,高輸入線路的最大功率可能是最低輸入線路電壓所輸送功率的兩倍。這會迫使電源設計人員必須對功率級進行過量設計。本文將探討輸入功率增加的原因以及降低方法。此外,還將介紹一種可提升峰值電流模式控制性能的創新方法。
2020-08-13
峰值電流模式 輸入功率 耦合電感器
-
如何在高效脈沖跳頻模式下選擇輸出濾波電容器
脈沖跳頻模式 (PSM) 是一種廣泛用于提高輕負載效率的方法。我們將以具有 PSM 模式的 TPS65290 器件為例介紹如何選擇輸出濾波電容器。圖 1 和圖 2 分別顯示了 TPS65290 在 PSM 模式下的簡化方框圖和輸出波形。
2020-08-13
脈沖跳頻模式 輸出濾波電容器
-
電子系統的浪涌管理和系統保護
今天,防止電子產品出現電路故障以及管理上電浪涌電流的方法都得到了長足發展,簡單的保險絲以及不確定 P 通道 FET 演變成了高級程度大大提升的解決方案。這些高度集成的解決方案不僅可管理進入系統的浪涌電流,而且還可使導通元件(通常是 FET)處于安全工作范圍 (SOA) 內,由此為系統診斷提供了更...
2020-08-13
電子產品 上電浪涌電流 保險絲 FET
-
Digi-Key將獨家提供EAO Corporation的全新數字產品選型表工具
Digi-Key與 EAO 簽署了全球合作協議,為客戶獨家提供新的數字產品選型表 (DPS) 工具。該數字產品選型表是一種直觀的交互式虛擬配置工具,為客戶提供了極具吸引力的用戶體驗,可用于選擇緊急停止開關,能讓工程師和設計人員輕松地按照特定需求在線配置產品。
2020-08-12
Digi-Key EAO Corporation 數字產品選型表工具
- 低功耗藍牙賦能的太陽鏡為摩托車手提供免分心導航體驗
- 【“源”察秋毫系列】柔性可穿戴電子設備材料的導電測試
- 羅德與施瓦茨中標中國移動RedCap以及Cat1bis一致性測試系統項目
- Senseair氣體傳感器“Sunlight R290”,適用于檢測高度易燃制冷劑R290
- 意法半導體推出靈活、節省空間的車載音頻D類放大器
- 貿澤電子即日起開售TE Connectivity BESS堆疊式混合連接器
- Vicor 發布最高密度的車規級電源模塊,支持電動汽車實現 48V 電源系統
- 示波器并非千篇一律:ADC 和低本底噪聲為何至關重要
- 采用IGBT5.XT技術的PrimePACK?為風能變流器提供卓越的解決方案
- 三極管電路輸入電壓阻抗
- 晶振怎么用,你真的知道嗎?
- 如何在設計中輕松搭載GaN器件?答案內詳~~
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall