-
運放的頻率特性等效電路
由于各級電路的電路形式以及增益不同,故等效的RC時間常數也不同。輸出級為電壓跟隨器形式。其增益最低,但帶寬最寬(即RC低通截止頻率最高)。即RC時間常數最小。
2022-09-28
運放 等效電路
-
多波束相控陣接收機混合波束成型功耗優勢的定量分析
本文對模擬、數字和混合波束成型架構的能效比進行了比較,并針對接收相控陣開發了這三種架構的功耗的詳細方程模型。該模型清楚說明了各種器件對總功耗的貢獻,以及功耗如何隨陣列的各種參數而變化。對不同陣列架構的功耗/波束帶寬積的比較表明,對于具有大量元件的毫米波相控陣,混合方法具有優勢。
2022-09-28
相控陣 接收機 波束成型
-
如何將運算放大器用作差分放大器查找電壓值的電壓差
運算放大器最初是為模擬數學計算而開發的,從那時起,它們已被證明在許多設計應用中都很有用。正如我的教授所說的那樣,運算放大器是算術電壓計算器,它們可以使用求和放大器電路執行兩個給定電壓值的加法,并使用差分放大器執行兩個電壓值之間的差。除此之外,運算放大器還通常用作反相放大器和同...
2022-09-27
運算放大器 電壓差
-
運算放大器的偏置電流及消除偏置電流影響
偏置電流在運放輸入端外部電阻后產生電壓會對使用者造成麻煩,產生系統誤差。比如對于一個同相單位增益緩沖電流,如果信號源電阻為 1MΩ,那么當 時,就會產生 10mV 的誤差,對于任何系統這個誤差都不能被忽略。
2022-09-27
運算放大器 偏置電流
-
LOTO示波器 實測開環增益頻響曲線/電源環路響應穩定性
一般我們用的電源系統/控制系統或者信號處理系統都可以簡單理解成負反饋控制系統。最典型的,運放組成的信號放大電路就是這樣的系統。本文以最簡單的運放信號放大電路為例,演示如何使用LOTO示波器測量控制系統的開環增益頻響曲線,以及演示電源的環路響應穩定性測試。
2022-09-26
LOTO示波器 開環增益頻響曲線 電源環路
-
利用電流互感器作為低成本非侵入式定時觸發器
在諸多工業儀器設備中,都需要用到步進電機。實際應用中,需要檢測步進電機驅動系統中的運動,然后在開發的基于伺服電機的系統中啟動運動。因為這兩個系統都是模擬人類的呼吸運動,所以10毫秒的響應時間就足夠了。
2022-09-26
電流互感器 非侵入式定時觸發器
-
功率放大器模塊及其在5G設計中的作用
許多射頻設計人員都對 Franklin Douglass 的名言深有同感:“沒有斗爭就沒有進步?!痹跒?5G 進行設計時,尤其如此??萍加型淖儫o線通信,但也會帶來設計難題。利用功率放大器模塊 (PAM) 來化解。以下是你需要知道的一切。
2022-09-23
功率放大器 模塊 5G
-
延時校準、脈沖測試一定要做的事兒!
進行雙脈沖測試的主要目的是獲得功率半導體的開關特性,可以說它伴隨著功率器件從研發制造到應用的整個生命周期。基于雙脈沖測試獲得的器件開關波形可以做很多事情,包括:通過對開關過程的分析驗證器件設計方案并提出改進方向、提取開關特征參數制作器件規格書、計算開關損耗和反向恢復損耗為電源...
2022-09-20
延時校準 脈沖測試 泰克
-
讓數字預失真的故障排除和微調不再難 必備攻略請查收
本文介紹ADI ADRV9002的數字預失真(DPD)功能。所用的一些調試技術也可應用于一般DPD系統。首先,概述關于DPD的背景信息,以及用戶試驗其系統時可能會遇到的一些典型問題。最后,文章介紹在DPD軟件工具幫助下可應用于DPD算法以分析性能的調優策略。
2022-09-16
數字預失真 ADI ADRV9002
- 兆易創新GD32F30x STL軟件測試庫獲得德國萊茵TüV IEC 61508功能安全認證
- 芯科科技第三代無線開發平臺引領物聯網發展
- MSO 4B 示波器為工程師帶來更多臺式功率分析工具
- 艾為電子推出新一代高線性度GNSS低噪聲放大器——AW15745DNR
- 瑞薩發布四通道主站IC和傳感器信號調節器, 以推動不斷增長的IO-Link市場
- e絡盟現貨供應 Abracon 新推出的 AOTA 系列微型鑄型電感器
- 加賀富儀艾電子推出支持Wi-Fi 6和藍牙的無線局域網/藍牙組合模塊
- 一文掌握UV LED在空凈消殺領域的主要應用
- 聚焦汽車智能化與電動化︱AUTO TECH 2025 華南展11月,已全面啟動,邀您共精彩!
- 【“源”察秋毫系列】 Keithley在碳納米管森林涂層纖維復合材料的應用
- 數字驅動工業,智能賦能制造 AMTS & AHTE SOUTH CHINA 2024同期會議全公開!
- 團體觀展招募!104CEF開啟組團觀眾通道,解鎖更多禮遇
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall