-
我們的目標是什么?小尺寸!高散熱!
當今典型的可編程邏輯控制器(PLC)包含許多模擬和數字輸出,用來控制和監視工業及生產過程。模塊化被廣泛采用,并且在輸入和輸出(I/O)方面,它涵蓋了模擬I/O和數字I/O的基本功能。模擬輸出提出了一個特殊的挑戰(如圖1所示),因為需要在眾多不同負載條件下提供高精度的有源驅動設定值。有源驅動器級...
2020-02-11
小尺寸 高散熱 AD5758
-
循環冗余校驗確保正確的數據通信
在工業環境中,電子系統通常工作在極端的溫度條件下,或處 于電子噪聲環境,或是其它惡劣條件,而系統在這種條件下能 否正常工作至關重要。舉例來說,如果發送給控制機器臂位置 的DAC 的數據遭到破壞,機器臂就會按非預期的方向移動, 這不僅危險,而且代價巨大。試想一下,機器臂如果砸到生產 線上...
2020-02-10
冗余校驗 數據通信
-
寬動態范圍的高端電流檢測:三種解決方案
在電機控制、電磁閥控制、通信基礎設施和電源管理等諸多應用中,電流檢測是精密閉環控制所必需的關鍵功能。從安全至關重要的汽車和工業應用,到電源和效率至關重要的手持式設備,都能發現它的身影。利用精密電流監控,設計人員可以獲得關鍵的瞬時信息,例如電機扭矩(根據電機電流)、DC/DC轉換器效...
2020-02-10
電流檢測 解決方案
-
帶精密電源基準電平轉換的高性能差分放大器
采用小尺寸工藝設計的高性能ADC通常采用1.8V至5V單電源供電。為了處理±10 V或更大的信號,ADC一般前置一個放大器電路以衰減該信號,防止輸入端飽和。在信號包含大共模電壓時普遍采用差分放大器(diff amp)。
2020-02-07
精密電源 基準電平 差分放大器
-
紅外熱像儀的原理
什么是紅外熱像儀?紅外熱像儀是一種無損檢測技術,是對被檢測物體表面進行非接觸的熱測量及測成像并分析其熱圖譜的方法。
2020-02-07
紅外熱像儀 原理
-
新型高分辨率乘法DAC擅長處理交流信號
所有數模轉換器(DAC)都提供與數字設置增益和所施加基準 電壓之積成比例的輸出。乘法DAC與固定基準電壓DAC不 同,因為它可以將高分辨率數字設置增益應用施加到可變帶寬 模擬信號上。本文將討論電阻梯乘法DAC及其對交流信號處 理應用的適用性。
2020-02-06
乘法DAC 交流信號
-
內置片內電阻的雙路差動放大器實現精密ADC驅動器
配有運算放大器和外部增益設置電阻的分立式差動放大器精度一般,并且溫度漂移明顯。采1%、100ppm/°C標準電阻,最高2%的初始增益誤差最多會改變200 ppm/°C,并且通用于精密增益設置的單片電阻網絡過于龐大且成本較高。此外,大多數分立式運算放大器電路的共模抑制都比較差,并且輸入電壓范圍小于電源...
2020-02-06
電阻 差動放大器 ADC 驅動器
-
如何降低高級傳感器產品的功耗?
像傾斜傳感器ADIS16209(見 附錄)這樣的傳感器系統具有集成度高、規格全面的特點,采用緊湊型封裝,并且價格合理,使系統開發人員能夠輕松運用自己可能并不熟悉的傳感器技術,從而將成本和風險降至最低。由于精度是完全按給定的功率電平確定,因而似乎會約束開發人員降低功耗的能力。但是,對于必須...
2020-02-06
傳感器 功耗
-
四通道16位電壓 / 電流輸出DAC節省多通道PLC的空間、成本和功耗
可編程邏輯控制器 (PLCs)使用邏輯、時序控制、定時、計數和算術算法等快速、確定性的功能來控制機器和過程。PLC使用模擬和數字信號與終端節點通信,例如讀取傳感器和控制執行器。典型的通信方法包括電流/電壓環路、Fieldbus1和工業以太網2協議。
2020-02-06
DAC PLC 功耗
- 低功耗藍牙賦能的太陽鏡為摩托車手提供免分心導航體驗
- 【“源”察秋毫系列】柔性可穿戴電子設備材料的導電測試
- 羅德與施瓦茨中標中國移動RedCap以及Cat1bis一致性測試系統項目
- Senseair氣體傳感器“Sunlight R290”,適用于檢測高度易燃制冷劑R290
- 意法半導體推出靈活、節省空間的車載音頻D類放大器
- 貿澤電子即日起開售TE Connectivity BESS堆疊式混合連接器
- Vicor 發布最高密度的車規級電源模塊,支持電動汽車實現 48V 電源系統
- 打造工業頂級盛會:意法半導體工業峰會2024在深圳舉辦
- 第104屆中國電子展重磅推出半導體設備及核心零部件展
- 英飛凌推出CoolSiC肖特基二極管2000 V 效率更高,設計更簡單
- 示波器并非千篇一律:ADC 和低本底噪聲為何至關重要
- 采用IGBT5.XT技術的PrimePACK?為風能變流器提供卓越的解決方案
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall